Device drivers and drive letters for windows – Apricorn Aegis NetDock - Mac Edition User Manual

Page 13

Advertising
background image

13

www.apricorn.com

Device Drivers and Drive Letters for Windows

1. Boot up your computer into Windows 2000/XP/Vista/7.

2. Connect the Aegis NetDock integrated cable as described on the previous

page

3. Windows will automatically install its resident device driver (USB Mass

Storage Device). After the installation, Aegis NetDock will appear under

a new drive letter in ‘My Computer’ (2000/XP) or ‘Computer’ (Vista/7).

4. If Aegis NetDock does not appear in ‘My Computer’ or does not work

properly, right click on ‘My Computer’ and click on ‘Manage’ then under

‘System Tools’ you will click on ‘Device Manager’ and check whether the

devices are installed as indicated below.

Installed Device Drivers

Location

USB Mass Storage Device

Installed under ’Universal Serial

Bus Controllers’.

Slimtype DVDRW

Installed under ’DVD/CD-ROM

drives’ (the drive listed in the

figure may differ from your Aegis

NetDock drive).

Advertising
This manual is related to the following products: