Using the system – AMDEN CORP Cybersonic3 User Manual

Page 5

Advertising
background image

USING THE SYSTEM

USING THE SYSTEM

7

2. Place the tongue cleaner into your mouth and on top of your

tongue. Use light pressure and rub over the top surface in back
and forth motions. Pull or scrape the residue out and expel.

SONIC FLOSSER ATTACHMENTS PLUS PRE-STRUNG
REPLACEMENT HEADS

1. Place the flosser attachment onto the power handle. Then snap

the pre-strung replacement head into the flosser attachment.

2. Turn on the power handle. Insert floss between

teeth. For tight teeth, you may need to move
the flosser from side to side.

3. To clean between your teeth, slide the floss up

and down both sides of your teeth. Also floss
under the gum line.

4. To replace the used flossing head, place

thumbnail under the rear tab and snap
upward and out.

5. Dispose of replacement heads after each use.

Order replacements by calling 1-800-774-7525.

SONIC WHITE

BLEACHING GEL (OPTIONAL)

Dispense a bead of Sonic White on the brushhead about the size
of a pea. Follow the same instructions as directed on page 6
under Sonic Brushing Attachments, #1 and #2 only. Brush the
outer/visible surfaces of the front teeth only. Discontinue use or
consult your dentist if prolonged sensitivity occurs

6

USING THE CYBERSONIC3

®

SYSTEM

The Cybersonic3

®

System is an advanced sonic oral-care system that

disintegrates plaque on contact and features a full range of
attachments for complete oral health. Follow the simple instructions
below to begin using the attachments properly.

SONIC BRUSHING ATTACHMENTS

1. Place the Sonic brushing attachment onto the

power handle. Remove the brush head cap
and apply toothpaste or gel if desired.

2. Turn on power handle. Using moderate

firm pressure, make a small circular motion
over all surfaces of your teeth.

Note:

Peroxide-baking soda toothpastes may damage
the plastic used in cybersonic3

®

.

3. When brushing the sides of your teeth,

place the brush head at a 45° angle. Apply
firm pressure while moving along the gum
line. Our unique “Hyper-Bass”
technology directs sonic cleaning
below the gum line. Spend at
least one minute brushing all
surfaces of your teeth.

TONGUE CLEANING
ATTACHMENTS

1. Place the sonic tongue cleaning attachment onto the power handle

and use with or without paste/gel.

Use Moderate-Firm

Pressure

Sonic Cleaning Gets

Below the Gum Line

Sonic Agitation Ribs/Ridges

Remove
Odor Causing
Elements &
Residue

Advertising