B&G H50 Wireless VHF Handset - Manual (Page 55)

TOM
DSC TEST
►SEND?
DSC TEST
MANUAL NEW
SAM
►TOM
DSC CALL
LL REQUEST ▲
TRACK BUDDY
►DSC TEST
MMSI/GPS
TOM
DSC TEST
WAIT.. 00:17
6. If there is no reply after 30 seconds, the radio asks you if you want to retry.
8-13-2 Receiving an incoming DSC TEST call reply (DSC TEST ACK)
1. When you receive notification of a DSC TEST reply, press SILENC softkey (AIS/IC key) to
silence the alert.
2. If the radio recognizes the user MMSI as one of your buddies, the buddy’s name is
displayed in place of the user MMSI.
8-13-3 Acknowledging an incoming DSC TEST call
The radio sounds a friendly two-tone alert when it detects an incoming DSC TEST call.
Note: If TEST REPLY is set to AUTO, no sound will be emitted.
1. If the radio recognizes the MMSI as one of your buddies, your buddy’s name is displayed
in place of the MMSI.
2. Press SILENC softkey (AIS/IC key) to silence the alert.
3. The radio will automatically acknowledge the call if TEST REPLY is set to AUTO (See sec-
tion 5-9) and after a TIMEOUT period set for AUTO REPLY (See section 5-10).
CALL FROM
TOM
AUTO ACK
IN 10S
▲▼ 00:02
TEST
CALL FROM
TOM
AUTO ACK
▼ 00:01
4. Alternatively, if TEST REPLY is set to MANUAL, a manual response is required, press ACK
(AIS/IC key) to acknowledge the DSC Test Call.
CALL FROM
TOM
AUTO ACK
IS OFF
▲▼ 00:02
TEST
CALL FROM
TOM
AUTO ACK
▼ 00:01
5. Press +/- button or rotate the CH knob to scroll any further information (if available), or
press EXIT to cancel.
B&G - V50 & H50 Operation Instructions 55