B&G Network Depth - Manual (Page 3)

INTRODUCTION TO NETWORK DEPTH NETWORK DEPTH DISPLAY UNIT
The Network DEPTH unit measures and displays Depth
information on a large Liquid Crystal Display (LCD). The
five keys allow selection of the displayed information and
setting of the units mode, calibration factors and alarms.
It can operate as the main Network DEPTH unit either
alone or as part of an Integrated Network Instrument
System taking inputs directly from a Depth Sensor that
plugs directly into the rear of the display. It will also
operate as a repeater of depth information received via
the two Network cable tails.
The Network Depth unit has three adjustable alarms:
1. Shallow water alarm
2. Deep water alarm
3. Anchor alarm
An internal alarm buzzer will sound when an alarm
condition is met and the display will flash. The alarm is
broadcast to all other Network Instruments in an
integrated system, they will also sound their alarms and
flash their displays (except Network WIND). The Network
DEPTH unit will also indicated Network PILOT alarms and
fault conditions.
610-HB-0501-04 3