Baseline Systems BaseStation 1000 - Manual (Page 9)

BaseStation 1000 Wi-Fi Module Installation and User Guide
e. Press the + button to apply the update. When the update is complete, the controller
restarts and briefly displays the new firmware version.
f. Unplug the USB drive from the port on the controller.
Step 3 – Configure the Wi-Fi Connection in the Controller
You need to know the name of the wireless network that you are going to connect to and the exact
spelling (including uppercase/lowercase letters) of the security key for the network.
1. On the BaseStation 1000, press the System Setup button. The System Setup menu displays.
2. Press the  button to highlight the Network Setup option, and then press the OK button to
select it. The Network Setup menu displays.
After the Wi-Fi module hardware has been installed and is powered up, the WiFi Setup option
displays on the Network Setup menu.
3. Press the  button to highlight the WiFi Setup option, and then press the OK button to select
it. The WiFi Setup screen displays.
4. In the Find Network field, press the OK button
to find the available wireless networks. The list
of networks displays with bars on the left that
indicate the signal strength. More bars
represent a stronger connection.
5. Press the  button to highlight the network that you want to connect to, and then press the
OK button. The Set Security Key screen displays.
6. Press the arrow buttons to move the cursor to
the characters in the security key. When the
cursor is on the character that you want to
select, press the OK button. The character that
you selected displays at the top of the screen.
Note: If you need to enter an uppercase letter,
press the arrow keys to move the cursor to
Shift at the bottom of the screen, and then
press the OK button. The characters on the screen change to uppercase. To change the
characters back to lowercase, select Shift again.
7. Continue selecting characters until you have accurately spelled out the security key.
Note: Remember that a security key is case sensitive.
8. Press the arrow buttons to move the cursor to OK on the bottom row of the keyboard screen,
and then press the OK button. The WiFi Setup screen redisplays and shows that the security
type has been automatically detected. The Key field shows Set? even though you already
filled in the key.
Page 5