Baseline Systems BaseManager 2.0 - Manual (Page 12)

BaseManager 2 Quick Start Guide
Appendix
Working with the Site Network Administrator
If your installation site has a managed network, you will need to work with the network
administrator at the site to complete the setup. You might also need to ask the admin to make
some configuration changes that allow the communication to/from your device to get out to the
Internet via the site’s network.
Ethernet Radio
Ask the network administrator to assign a range of static IP addresses for the Ethernet radios so
that each radio will have a unique static IP address. Your network administrator needs to know how
many radios need static IP addresses. However, you don’t need to identify the specific radios for
the administrator because any IP address can be assigned to any radio unit. Please refer to the
Ethernet Radio Configuration Guide for more information.
Ask the network administrator for the Subnet Mask and Default Gateway for the LAN.
Wi-Fi
Ask the network administrator to fill in the Wi-Fi Settings Worksheet for the target network that
this Wi-Fi module will connect to. You will find the Wi-Fi Settings Worksheet on the next page of
this document.
Page 8