Baseline Systems BL-5308 - Manual (Page 3)

1-866-294-5847
Rev 11.1.2012
www.baselinesystems.com
(Netafim or Similar Three-Wire Water Meters)
Diagram B: Flow Devices with Three Wires
BL‐5308 Flow biCoder
Two‐Wire
Connect the blue wire to
the yellow power wire
Connect the yellow wire
to the sensor wire
Three Wire Flow Sensor
For Most Netafim Hydrometers (including Baseline BL-BHM series hydrometers): Connect the bare copper wire, which
is the common, to the white wire with the black stripe from the BL-5308. Connect the clear wire, which is the sensor
wire, to the yellow wire from the BL-5308. Connect the yellow wire, which is the power wire, to the blue wire from the
BL-5308.
Connect the white wire
with the black stripe to
the common wire
BL‐5308 Flow biCoder Wire Key
Blue wire = power
Yellow wire = sensor
White wire with black stripe = common