BE Pressure supply 270cc Honda GX270 B389HC User Manual
Page 23
23
electric
washer
components
power
cord
connection
1. Make certain the motor switch is in the “OFF” position.
2. Ensure electrical supply is identical to the specifications listed on the
pressure washer data plate.
3. GROUNDING INSTRUCTIONS: This product must be grounded. If
it should malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock.
This product is equipped with a cord having an equipment-grounding
conductor. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and
ordinances.
4. DANGER: Improper connection of the equipment-grounding
conductor can result in a risk of electrocution. Check with a qualified
electrician or service personnel if you are in doubt as to whether the
outlet is properly grounded. Do not modify the plug - if it will not fit the
outlet, have a proper outlet installed by a qualified electrician. Do not
use any type of adaptor with this product.
5. GROUND FAULT CIRCUIT INTERRUPTER PROTECTION: This
pressure washer may be provided with a Ground Fault Circuit
Interrupter (GFCI) built into the plug or the power supply cord, test the
GFCI each time it is plugged into an outlet according to instructions on
the GFCI. DO NOT use the pressure washer if the test fails! The GFCI
provides additional protection from the risk of electric shock. Should
replacement of the plug or cord become necessary, use only identical
replacement parts that include GFCI protection.
WARNING
Risk of electrocution.
This unit must be connected to a properly grounded
outlet.
• DO NOT use an adapter or remove the third grounding prong.
• To reduce the risk of electrocution, keep all connections dry and off
the ground.
• DO NOT touch plug with wet hands.