Canon ImageCLASS MF4690 User Manual
Page 23
Advertising
22
22
U
sing the S
can t
o E-M
ail F
ea
tur
e
Using the Scan to E-Mail Feature
5.
Specify an authentication method.
When the SMTP authentication is used
① SMTP Authentication(SMTP AUTH): Select [ON].
② User name:
Enter the SMTP server address you confirmed in “Checking the
Information Required for the Scan to E-Mail Feature,” (
→ P. 9).
③ Password:
Enter the password that you confirmed in “Checking the
Information Required for Scan to E-Mail Feature,” (
→ P. 9).
6.
Make sure the settings are correct, and then press [OK].
7.
Turn off the main power switch of the machine. Wait for 10 seconds, and then turn on the
switch.
That completes the setting of the E-Mail Send feature.
Please proceed to “Registering E-Mail Addresses,” (
→ P. 2).
●
Advertising