Bio-Rad Aminex Organic Acid and Alcohol Analysis Columns - Manual (Page 2)

Warranty
Holders received damaged in ship-
ment or defective in workmanship will be
replaced if returned within 60 days of the
invoice date. No other warranty as to end
use, seal life, or performance is made.
Introduction
The Standard Cartridge Holder is a
convenient, reusable holder that will
accommodate any of Bio-Rad’s 30 x
4.6 mm HPLC cartridges. Its function is to
connect the cartridge to the HPLC system.
The Deashing Holder accommodates
two 30 x 4.6 mm cartridges in series. It is
typically used with the Cation H
+ and
CO
3
- carbohydrate deashing cartridges.
Installation
The inlet and outlet connections on
the holders are zero dead volume connec-
tions which use compression type reverse
nuts and ferrules for attachment to the
HPLC system (see Figure 1). Nuts and
ferrules are provided with the holders. To
achieve the best results, new connections
should be swaged. This is mandatory
when replacing cartridge holders manu-
factured prior to March 1987. If tubing
1
M1250131B 11/28/2000 3:16 PM Page D