BlueAnt M1 Stereo Speakers - Manual (Page 5)

5
EN
functionality then execute a Bluetooth search to fi nd
the M1. (Please refer to your handsets user manual for
further instructions on how to connect a Bluetooth
device to your specifi c model).
3. When the mobile phone displays a list of found
Bluetooth devices, please select the Blueant M1.
(Note: Please ensure you establish the Bluetooth
connection in a timely manner, as a long pause
between actions may cause the device to revert to
standby mode resulting in the need to execute another
Bluetooth device search)
4. Once you select the M1 from the found devices list,
your mobile phone will request a password/pin code,
please enter 0000 then press OK.
5. Pairing is successful once the alternating red/blue
blinking of the Bluetooth Indicator (8) changes to
blinking blue (standby mode). The M1 is now ready to
use with your mobile phone.
Note: Some phones (such as the Samsung SGH U700) cannot be
paired via the standard Bluetooth search. In this case, at step 2 please
start the music player, press options, choose ‘play via’, and select
Bluetooth stereo headset or A/V headset and then search for devices.
Pairing to a Bluetooth-enabled PC/Laptop:
Important Note:
Please ensure that the Bluetooth dongle you are using
with your PC or Laptop supports A2DP and that you
have installed the A2DP compatible Bluetooth application
software before proceeding.
1. From OFF, press and hold the On/Off/Stop Button (9)
for 5 seconds until the Bluetooth Indicator (8) turns to
a blinking red/blue, this indicates that the M1 is ready
to pair.
2. While the M1 is in pairing mode, access the Bluetooth
program of your PC. (Please refer to your Bluetooth
software’s user manual for instructions on how to pair