BlueAnt S1 Sun Visor Handsfree Kit - Manual (Page 7)

7
Installing the S1 in your Car
The S1 is designed to attach to your car's sun visor. Use the supplied plastic clip to attach the S1 to
the visor.
1. Attach the clip to the slots on the back of the S1 and slide it so that it locks in place.
Do not force on the S1's buttons when you attach the clip.
2. You can attach the clip 2 different ways, depending on how you want to position the S1 on your
car's sun visor.
The closed side of the clip should be aligned with the top or bottom of the BlueAnt S1.
3. Slide the clip and the BlueAnt S1 onto your car's sun visor.
Make sure the microphone is directed towards you.
Do not leave the BlueAnt S1 in direct sunlight or in any area where the temperature
may exceed 60°C (140°F), such as inside a closed car on a hot day.