Calyx Kong Purple - USB Headphone Amplifier - Manual (Page 5)

Calyx Kong Purple Hi-Fi USB Headphone Amplifier
Digital & Analog Co., Ltd. (Rev. 1.0) -5-
4. Installation
+
-
O
Calyx Kong
<TOP>
<FRONT>
<REAR>
1. USB Terminal
Connect the USB cable from the PC to USB terminal at the front plate of the amplifier.
2. Headphone Terminal
Connect the headphone (or the active speaker) to headphone terminal at the rear plate of the
amplifier.
3. LED
If the amp is installed normally, the led will lights up on the top plate of the Calyx Kong.
4. Button
‘+’ button : volume up
‘-’ button : volume down
‘o’ button : mute / un-mute
※ Calyx Kong supports plug and play.
Operating System : Microsoft Windows 98SE (The button does not work this version) / Microsoft
Windows Me (The button does not work this version) / Microsoft Windows XP / Microsoft
Windows Vista / Apple Computer MAC OS 9.1 or later version / Apple Computer MAC OS x10.0 or
later English version / Apple Computer MAC OS x10.1 or later Japanese version (For the Mac OS
X 10.0 Japanese edition, plug and play does not work appropriately for USB audio devices.)