Calyx FEMTO - Manual (Page 7)

7
3. Description of Functions
1 Power Switch
This is located on the left side panel when you see from the front.
Press once to turn the unit on and once more to turn it off.
2 Input select
These buttons select the signal from the digital inputs on the rear panel.
3 Level- Output level control buttons
They adjust the output analog level.
This high quality digital volume control allows you to adjust from 0(mute) to 100 (0dB).
4 Remote Sensor
The signals from the remote control are received by this sensor. Please point your remote
control to the sensor when using the remote control.
5 Display
Input Display
This shows you which digital signal is selected.
Sampling Frequency
This indicates the sampling frequency of incoming digital signal.
Level Display
This shows you the output level of analog signal.
Digital Filter
There are 3 different digital filters you can choose. When you press the button of filter, it
changes “Filter 1”, “Filter 2” and “Filter 3”.
Phase of Analog output
Analog out of FEMTO is true-balanced out. You can choose the right configuration of analog
phase for your pre-amplifier or power amplifier. “Normal” means pin 2 is hot “Inverse” means
pin 3 is hot.