Rear view – Canon Image Formula P-215 User Manual
Page 24
24
K Start Button
Press this button when you want to start scanning the document
loaded in the feed tray.
When the power of the scanner is ON, this button lights and
indicates the status of the scanner as shown below.
IMPORTANT
The Start button may blink slowly when the USB cable is
connected and the feed tray is opened. When this occurs, wait for
the power indicator to stop blinking and light steadily before using
the scanner.
Rear View
A Rear Card Slot
When a plastic card is fed, a portion of the card protrudes from here
momentarily.
B Auto Start Switch
Use this switch to change the operation mode of the scanner.
C USB Connector
Connect the USB cable supplied with the scanner (or one that
supports Hi-Speed USB 2.0).
D Kensington Slot
Connect a key chain to prevent theft.
E Power Connector
Connect the supplied power supply USB cable or a separately sold
AC adapter.
Hint
This scanner does not have a power switch. For details,
Start button
status
Meaning
Lit
The power of the scanner is ON.
Flashing
• Paper is jammed.
• A double feed has been detected and the
scanner has stopped.
• The top unit is open.
• Another scanner error has occurred.
A B C
D
E