Problems starting software programs – Canon FB620P User Manual
Page 60
60
Nothing displays when the CD-ROM is placed in the drive
Cause :
CD-ROM will not automatically run the menu program
Solution:
Start the menu program manually (
Installation just doesn’t seem to be working
Solution:
Manually install the software by clicking the [Start] button, select-
ing [Run] and typing one of the command lines below into the box.
If your CD-ROM drive is labeled other than [D:], substitute the
appropriate letter, such as [E:] or [F:], in the lines below.
To install CanoCraft CS-P: [D:\CANOCRFT\ENGLISH\DISK1\SETUP.EXE]
To install iPhoto Express 1.1:
[D:\IPEX\SETUP.EXE]
To install OmniPage Limited Edition: [D:\OPLE\DISK1\SETUP.EXE]
To install Adobe Acrobat Reader:
[D:\ACROREAD\ENGLISH\AR32E301.EXE]
To read the electronic manuals on the CD-ROM, navigate to the
[D:\MANUAL] folder and open the PDF files in the respective
subfolders.
Problems Starting Software Programs
[Scanner not found] message displays
Cause 1:
Scanner not detected because the AC adapter is not correctly
plugged into the electrical outlet
Solution: