Cooper Instruments & Systems PTT 260 Digital Pressure Sensor - Manual (Page 12)

CF 197 9 I&M011-10172 Rev A 5/11
Example 1) Pressure range 0.00~1450 psi (0.0~100.0%F.S.) corresponding to analog output of
4~20mA dc is scaled to pressure range 0.00~1,423 psi (0.0~98.1%F.S.) corresponding to analog
output 4~20mA dc.
10. COMPARATOR SWITCH SETTING MODE / LOOP CHECK MODE
Setup Steps
Pressing the key for less than 3 seconds will display message within the Comparator
Setting/Loop Check Mode. Scroll through appropriate displays and select feature to change/confirm.
LED ring will flash until this menu is exited to the Measurement Mode by holding the key for
more than 3 seconds.