COVIDIEN Kangaroo™ 924 - Manual

Kangaroo
™
924
Enteral Feeding Pump
Instructions for Use
15 Hampshire Street
Mansfield, MA
02048
1.800.962.9888
508.261.8000
www.covidien.com
COVIDIEN, COVIDIEN with logo and ™ marked brands
are trademarks of Covidien AG or its affiliates.
© 2008 Covidien AG. All rights reserved.
H-6210-5M-0308
To change rate press “Start/
Hold” and set rate by press-
ing increase/decrease but-
tons on the front panel.
Close roller clamp on pump
set.
Press “Start/Hold”.
Fill or spike feeding bag
prior to setting up pump. Slowly open clamp and fill
entire line with fluid; leav-
ing a few drops in the drip
chamber. Close roller clamp.
Load set per arrow diagram
on pump.
(Do not over-
stretch tubing.)
Press on and wait while a
system check is performed. Check “VOL CLR” light or
press ”VOL” then “VOL
CLR” to clear volume, (if
necessary). Set feed rate using either
increase/decrease buttons or
turning side knob.
Optional Feature - Press
“VTBD” button and set by
either turning the knob or
using the increase/decrease
buttons. (Only use “VTBD”
if you want to stop and
alarm once a set amount of
formula is delivered). Open the roller clamp.
General Programing Instructions: