CTEK Z4300U SkyRouter - Manual (Page 16)

22 September 2009
13
4.2.1 The RS232 Interface
This screen sets basic parameters for the RS232 port and the auxiliary serial port. These settings should be made to
correspond to those on the far end of the serial connection or serial over IP emulation. The RS232 serial port is available
for al applications and can be connected to the TCP or UDB PAD feature. The auxiliary port is available for selected
applications.
Figure 10
Bit Rate – Selects transmit and receive speed. This setting is available on both the serial and auxiliary ports.
Character Length – Selects the number of bits representing a character. This setting is available on both the serial and
auxiliary ports.
Parity – Selects the parity bit setting that will match the far end. This setting is available on both the serial and auxiliary
ports.