Dell OptiPlex 780 - Manual (Page 7)

12 8
7 of 14
5
Determine the mounting method (Wall or Under Desk), then follow
the appropriate instructions on the pages noted below.
Wall Mount
Steps
Under Desk
Mount Steps
4
Push the system label carrier into the system sleeve, then slide the switch to lock.
CAUTION: Mounting fasteners are not
included with bracket. Use appropriate
fasteners to attach to a solid mounting
surface that can support 50 lbs. (23 kg). At a
minimum, the mounting surface should be
1/2” (1.25 cm) thick wood and mount using
4 metal wood screws (M4 x 12mm). CAUTION: The provided fasteners are
rated for use with 2 x 4 wood studs,
minimum. Consult an engineering profes-
sional to determine which fasteners are
appropriate based on surface material
and applied load.
Under Desk Mount Wood Stud Wall Mount
Under Desk
Mount
Wall
Mount
≥ M4 x 12mm
≥ 1/2”
(1.25 cm)
4x