Dell Latitude D620 - Manual (Page 53)

1. Follow the instructions in Before You Begin .
2. Turn the computer right-side up and open it.
3. Remove the hinge cover (see Hinge Cover ).
4. Remove the three screws across the top of the keyboard.
5. Rotate the keyboard up 90-degrees and lay it on the palm rest to gain access to the keyboard connector.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 hinge cover 2 keyboard
1 keyboard tabs (5) 2 screws (3) 3 palm rest
4 keyboard connector on system board 5 keyboard cable connector 6 pull-tab
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
NOTE: Lift the keyboard carefully in step 5 to ensure that you do not pull on the keyboard cable.