Dell OptiPlex GX620 - Manual (Page 209)

Back to Contents Page
Dell™ OptiPlex™ GX620
User's Guide
Module Bay
Module Bay
You can install a Dell™ portable device such as a floppy drive, CD/DVD drive, or second hard drive in the module bay.
Your Dell computer ships with either a CD/DVD drive or an airbay (filler blank) installed in the module bay. You can secure a device in the module bay by two
methods:
l Locking switch (accessed by removing the computer cover)
l Device screw (packaged separately)
See " Securing a Device in the Module Bay " for more information about securing a device in your computer.
Installing a Device When Your Computer Is Turned Off
To install a device in the module bay:
1. If the module bay contains an airbay instead of a device, pull the airbay out of the module bay and skip to step 5 . If the airbay is locked, remove the
device screw .
2. If the module bay contains a device that is locked, remove the cover and move the module locking switch to the unlocked position by raising the locking
switch. If a device screw is used, remove the screw.
3. Press the device latch release so that the latch release pops out.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or
placing heavy objects on top of them.
1 module locking switch