FORD f150 - Manual (Page 168)

USING STABILITY CONTROL
AdvanceTrac™ with Roll Stability
Control™ (RSC™)
The system automatically activates when
you start your engine. You can turn off the
electronic stability control and roll stability
control portions of the system off below
35 mph (56 km/h). When the transmission
is in position R, they are disabled. You can
turn off the traction control portion of the
system independently. See Using
Traction Control (page 164).
AdvanceTrac with RSC Features
Traction
control system
Electronic
stability
control
Roll stability
control
Stability
control OFF
light
Button func-
tions
Enabled Enabled Enabled Illuminated
during bulb
check
Default at start-
up
Disabled 1 Enabled 1
Enabled Illuminated
solid
Button pressed
momentarily
Disabled 4
Disabled Disabled Flashes then
illuminated
solid 2
Button pressed
and held for
more than 5
seconds at
vehicle speed
under 35 mph
(56 km/h)
Disabled 1 Enabled 1
Enabled Illuminated
solid
Vehicle speed
exceeds 35 mph
(56 km/h) after
button is
pressed and
held for more
than 5 seconds
166
F150 (TF6)
Stability Control