Instrument lighting dimmer, Daytime running lamps, Front fog lamps – FORD f150 User Manual

Page 73: Lighting

Advertising
background image

To turn autolamps on, rotate the
control to the fourth position.

To turn autolamps off, rotate the
control to the first, second, or third
position.

INSTRUMENT LIGHTING
DIMMER

E166125

Use the instrument lighting dimmer control
to adjust the brightness of the instrument
panel and all applicable lit components in
your vehicle.

Tap the left or right of the control to
the first detent to brighten or dim all
interior lit components incrementally.

Press and hold the left or right of the
control to the first detent until the
desired lighting level is reached.

Press and hold the right of the control
to the second detent to switch the
interior lights on.

Press and hold the left of the control
to the second detent to switch the
interior lights off.

DAYTIME RUNNING LAMPS

(IF

EQUIPPED)

WARNING

Always remember to switch your
headlamps on in low light situations
or during inclement weather. The

system does not activate the tail lamps
and may not provide adequate lighting
during these conditions. Failure to activate
your headlamps under these conditions
may result in a collision.

The system turns the headlamps on with
a reduced intensity output (halogen
headlamps) or turns the front turn lamps
on (HID headlamps) in daylight conditions.

To switch the system on:

1.

Ignition switch is in the on position.

2. Switch the lighting control to the off,

autolamp or parking lamp position.

FRONT FOG LAMPS

(IF EQUIPPED)

E163271

A

The headlamp control also operates the
fog lamps. The fog lamps can be turned
on only when the headlamp control is in
the parking lamp (second) position,
headlamps on (third) position, or autolamp
(fourth) position, and the high beams are
not turned on.

71

F150 (TF6)

Lighting

Advertising
This manual is related to the following products: