HP LaserJet 1320 - Manual (Page 34)

3. Click Next, and follow the instructions that the Installer provides to check and prepare
the system, and install drivers, plug-ins, and software.
This might take several minutes.
Print a Network Configuration page
When the printer is in the Ready state, press and hold the G
O
button for 5 seconds. The
Network Configuration page automatically prints with the printer Configuration page.
Note To reset the networking card, when the printer is turned off, press and hold the Reset button
located on the back of the printer. While holding down the Reset button, turn on the printer,
and continue to hold the Reset button until the printer is in the Ready state.
24 Chapter 2 Printer connections ENWW