Wired network setup problemsolving – HP LaserJet 1320 User Manual
Page 130
Wired network setup problemsolving
If the computer is unable to discover the HP LaserJet 1320n, HP LaserJet 1320tn, or
HP LaserJet 1320nw printer, perform the following steps:
1. Check the cables to ensure that they are properly connected. Check all of the following
connections:
●
Power cables
●
Cables between the printer and the hub or switch
●
Cables between the hub or switch and the computer
●
Cables to and from the modem or Internet connection, if applicable
2. To make sure that the computer's network connections are working properly (Windows
only), perform the following steps:
●
On the Windows desktop, double-click My Network Places or Network
Neighborhood.
●
Click the Entire Network link.
●
Click the Entire Contents link.
●
Double-click one of the network icons, and make sure that some devices are listed.
3. To verify that the network connection is active, perform the following steps:
●
Check the network light on the network (RJ-45) connector on the back of the printer.
●
If one of the lights is on solid, the printer is connected to the network.
●
If both network lights are off, check the cable connections from the printer to the
gateway, switch, or hub to ensure that the connections are secure.
●
If the connections are secure, turn off the power to the printer for at least
10 seconds, and then turn on the power to the printer.
120
Chapter 6 Problemsolving
ENWW