HP LaserJet 3015 - Manual (Page 117)

Part of the image did not scan
Was the original loaded correctly?
Make sure that you loaded the original correctly. See Loading originals to scan for
instructions.
Does the original have a colored background?
Colored backgrounds can cause images in the foreground to blend into the background. Try
adjusting the settings before you scan the original or enhancing the image after you scan the
original. See
Scanner resolution and color for more information.
Are text or images on the back of a two-sided original
appearing in the scan?
Two-sided originals can "bleed" text or images from the back side to the scan if the originals
are printed on media that is too thin or too transparent.
Is the original longer than 381 mm (15 inches)?
The maximum scannable length is 381 mm (15 inches) when you use the automatic
document feeder (ADF). If the page exceeds the maximum length, the scanner stops. (Copies
can be longer.)
CAUTION Do not try to pull the original from the ADF; you might damage the scanner or your original.
See
Media jams occur in the automatic document feeder (ADF) for instructions.
Is the original too small?
The minimum size that the automatic document feeder (ADF) supports is 51 by 89 mm (2 by
3.5 inches). The original might be jammed. See
Media jams occur in the automatic document
feeder (ADF) for instructions.
Is the media size correct?
In Scan settings, make sure that the input media size is large enough for the document that
you are scanning. See
Scanner resolution and color for more information.
ENWW Part of the image did not scan 107