HP LaserJet 3015 - Manual (Page 63)

Changing the default number of copies
You can choose to have the default number of copies be any number from 1 to 99.
To change the default number of copies
1. On the device control panel, press
MENU
/
ENTER
.
2. Use the < or the > button to select Copy setup, and then press
MENU
/
ENTER
.
3. Use the < or the > button to select Def. # of copies, and then press
MENU
/
ENTER
.
4. Use the alphanumeric buttons to type the number of copies (between 1 and 99) that you
want as the default.
5. Press
MENU
/
ENTER
to save your selection.
Note The factory-set default for the number of copies is 1.
ENWW Changing the default number of copies 53