Using the auto lighting optimizer, P.61, Mizer – Canon t2i 3.9 for Macintosh User Manual
Page 62: P.61), Cop y
61
If the shooting result is dark or the contrast is low, you can use the Auto
Lighting Optimizer function to auto-correct the brightness and contrast,
and obtain a more pleasant image.
You can also change the settings of the image shot with the camera’s
Auto Lighting Optimizer function.
This function is compatible only with RAW images shot with EOS-1D
Mark IV, EOS 5D Mark II, EOS 7D, EOS 60D, EOS 50D, EOS REBEL
T2i/550D and EOS REBEL T1i/500D.
* ALO stands for Auto Lighting Optimizer.
1
Select the [NR/Lens/ALO] tab sheet from the tool
palette in the edit window or edit image window.
2
Checkmark the checkbox.
O
For images shot with the camera’s Auto Lighting Optimizer
function, the checkbox is already checked.
3
Change the settings according to your preferences.
¿
Auto correction is applied to the image to match the settings.
O
For images shot with the camera’s Auto Lighting Optimizer
function, the settings at the time of shooting are applied as the
default values.
O
To cancel the Auto Lighting Optimizer, remove the check mark
from the checkbox.
Checkmark
Select from three levels:
Low/Standard/Strong
When [Highlight tone priority] is set to [Enable] in EOS 7D, EOS
60D and EOS REBEL T2i/550D Custom Functions, the Auto
Lighting Optimizer function cannot be set.
Using the Auto Lighting Optimizer
COP
Y