Canon EOS rebel xs - Manual (Page 93)

93
3 White Balance CorrectionN
With just one shot, three images having a different color tone can be recorded
simultaneously. Based on the color temperature of the current white balance
setting, the image will be bracketed with a blue/amber bias or magenta/green
bias. This is called white balance bracketing (WB-BKT). White balance
bracketing is possible up to ±3 levels in single-level increments.
Set the white balance bracketing
amount.
In step 2 for white balance correction,
when you turn the <6> dial, the “ ”
mark on the screen will change to “ ”
(3 points). Turning the <6> dial to the
right sets the B/A bracketing, and turning
it to the left sets the M/G bracketing.
X On the right side of the screen, “BKT”
indicates the bracketing direction and the
bracketing amount is also displayed.
Pressing the <B> button will cancel
all the [WB SHIFT/BKT] settings.
Press <0> to exit the setting and
return to the menu.
Bracketing Sequence
The images will be bracketed in the following sequence: 1. Standard
white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard
white balance, 2. Magenta (M) bias, 3. Green (G) bias.
White Balance Auto Bracketing
B/A bias ±3 levels
During WB bracketing, the maximum burst for continuous shooting will be lower
and the number of possible shots will also decrease to one-third the normal
number. If the [7 Custom Functions (C.Fn)] menu’s [High ISO speed
noise reduction] (p.155) is set to [1: On], WB bracketing will not be possible.
Since three images are recorded for one shot, the card will take longer to record the shot.
“BKT” stands for Bracketing.