Canon eos rebel t1i - Manual (Page 44)

44
1
Set the Mode Dial to <1>.
2
Aim any AF point over the
subject.
All the AF points will be used to focus,
and generally the closest object will
be focused.
Aiming the center AF point over the
subject will make focusing easier.
3
Focus the subject.
Press the shutter button halfway, and
the lens will adjust the focus.
X The dot inside the AF point achieving
focus flashes briefly in red. At the
same time, the beeper will sound and
the focus confirmation light <o> in
the viewfinder will light.
X If necessary, the built-in flash will pop-
up automatically.
4
Take the picture.
Press the shutter button completely to
take the picture.
X The captured image will be displayed
for about 2 sec. on the LCD monitor.
If the built-in flash has popped up,
you can push it back down with your
fingers.
1 Fully Automatic Shooting
AF point
Focus confirmation light