Canon Pixma MP530 - Manual (Page 20)

18 Chapter 1 Before Printing
Turning the Machine ON and OFF
Turn on the machine before starting printing.
„ Turning on the Machine
Before turning on the machine, confirm that the Print Head and ink tanks are set into place.
1
To turn on the machine, press [ON/OFF].
[COPY] flashes green for a while, and then turns on.
„ Turning off the Machine
1
To turn off the machine, press [ON/OFF].
The machine is off when the currently selected Mode button (e.g. [COPY]) stops flashing and
all Operation Panel lamps are off.
„ Setting the Power Saver Mode
<POWER SAVER MODE> will be displayed on the screen, if the machine is not operated for the
specified time (the default is 5 minutes).
You can change the interval of time to go into the Power Saver Mode as follows:
Note
If preparatory operations above are not yet finished, follow the Easy Setup Instructions to
complete them.
Note
z If the Alarm Lamp lights or flashes orange and an error message is displayed on the LCD,
see
“An Error Message is Displayed on the LCD” on page 113 .
z The machine goes into the Power Saver Mode if not operated for the specified time (the
default is 5 minutes) (See
“Setting the Power Saver Mode” on page 18 ). Press any button
to restore the display.
Important
When removing the power plug after turning off the machine, be sure to check that all the
lamps on the Operation Panel are not lit. If the power plug is removed from the wall outlet with
the lamps on the Operation Panel lighting or flashing, the machine cannot protect its Print
Head and may be unable to print.
Note
The power cannot be turned OFF while the machine is sending or receiving a fax, or when
there are unsent faxes stored in the machine’s memory.