Colorlight CLIR - Manual (Page 15)

CL IR
MANUAL Page 15
4.2 Zoom
In “CAM settings”-menu, navigate to “Zoom” and press “OK”.
Change the image magnification by moving the joystick up or down in the list until the requested
zoom setting is shown. For evaluation, all changes take effect immediately on the monitor.
P
ress “OK” to save the new setting or “Back” to return to previous selected zoom level.
X1
– Normal mode, no magnification.
X2 - Causes the thermal camera to digitally zoom in to x2 magnification.
X4 - Causes the thermal camera to digitally zoom in to x4 magnification.
X1 X2 X4