Humboldt HM-1327 Humboldt Marshall/TSR Loader - Manual (Page 18)

15
Press (CONFIGURATION) You will be asked for a password, enter:
You should see this screen:
Press (SELECT INPUT) to scroll through and choose the input
you wish to configure. Once you have selected a channel press
(CONFIGURE INPUT). You should see this screen:
Configuring Input
The Configuration screen will allow us to configure the Sensor Max value.
The sensor max value contains the formatting of this input as well as the
maximum value we will be calibrating to.
CONFIGURATION screen
* SELECT INPUT "CHI"
* CONFIGURE CHANNEL
INPUT 1 CONFIGURE
NAME = STAB
SENSOR MIN = 0
*SENSOR MAX = 10000