Integra LifeSciences CryoSolutions Cryosurgical Unit - Manual (Page 4)

4
most effective duration of treatment based upon
experiences with a variety of lesions as well as their size.
• In general, the degree of cold delivered to the treatment
site will be decisive in determining outcome. However,
a prolonged low temperature treatment will risk irreversible
tissue damage as well as unsatisfactory treatment. Other
factors, such as, application times, the type of lesion as well
as its depth are also relevant.
• It is important to recognize that prolonged cold exposure
could lead to unwanted tissue destruction.
• Do not use for longer than recommended.
Precautions
• Inspect cartridge for o-ring. If the o-ring is missing
do not attach the cartridge.
• Do not attempt to alter or, in any way, modify the
device or its performance. Such action would render
the warranty invalid.
• Never use a damaged unit regardless of evident functionality.
• The CryoSolutions ® device is to be used only with
compatible nitrous oxide cartridges provided by
Integra York PA, Inc. (“Miltex”). Attempted use of
substitute cartridges is a safety hazard and will void
the warranty and any liability.
• Do not attempt to use the cartridges for any other purpose.
• Cartridges are thermo sensitive. Do not expose to
temperatures above +50° C / 122° F or below -5° C / 23° F.
• Always use protective gloves when using CryoSolutions ®
device, including when installing or removing cartridges.
• Pin must be fully inserted into the pin insertion point
before attaching the cartridge.
• Cartridge must be aligned properly prior to assembly.
• Do not employ excessive force when connecting the
cartridge to the control mechanism.
• Do not remove cartridge until empty.
• Center tip prior to screwing into place. Do not over-tighten.
• Unsuccessful outcomes are not necessarily linked to the