Integra LifeSciences LED Loupes Light Source, Portable - Manual (Page 2)

If a battery is left in the charger for a significant period of time after it is fully charged, it will automati-
cally stop charging and display a flashing red light.
Indications: The LED Loupes Light Source is intended for use ONLY in conjunction with magnification loupes and
should not be used without them. The light source is used to
illuminate the magnified field only.
Rx Only: Caution: Federal (US) law restricts this device to sale by or on the order of a physician.
Contents:
1. LED lamp head and cable with loupes mount
2. Power pack with one lithium-ion rechargeable battery
3. Battery charger and AC wall adapter
1. Charge battery
Plug the power adapter into a power outlet and connect to charger unit.
a. A single red light will indicate power to the unit. If the red light does not appear, remove the battery
from the charger, unplug the power adapter from the charger unit and wait 5 minutes before
reconnecting. If the red light still does not appear, call Miltex Customer Support.
b. Slide the battery into the Charger Unit. Be sure the battery terminals are securely connected to
the Charger terminals.
c. The following lights on the Charger Unit indicate the battery charge status:
MILTEX ® PORTABLE LED LOUPES LIGHT SOURCE
DIRECTIONS FOR USE