Bissell 54K2E - Manual (Page 5)

w w w. b i s s e l l . c o m
A
ssembly
1. Slide upper body into lower body.
2. Secure with screws.
3. Slide handle assembly down into upper
body until it will go no further. Align
screw slots.
4. Secure with screw.
5. Place clean water/solution tank on back
of unit.
special features
Microban® antibacterial
product protection
Microban antibacterial product protection is
built into key components to help prevent
the growth of harmful common household
bacteria. It helps to keep the unit fresher an
cleaner between uses.
scotchgard ™ protector
Carpet protection applied at the mill typically
wears down over time from heavy foot traffic
and everyday cleaning, including deep
cleaning. To help restore this important
protection, only BISSELL offers cleaning
formulas with Scotchgard protector. This offers
extra protection against dirt and tough stains
to keep your carpets looking good longer.
before you clean
1. remove easily moved furniture (chairs,
lamps, coffee/cocktail tables, etc.) from
room if needed.
2. Vacuum carpet thoroughly.
3. Decide where to begin. Plan to leave
a path open to empty soiled water and
refill cleaner.
note: carpeting will dry in three
to four hours, depending on carpet
style and air circulation in room.
a floor fan speeds drying.
5
O
perations
1.
5.
3.
2.
4.