Warning, Ssembly, Perations – Bissell 20W7E User Manual

Page 5: Special features

Advertising
background image

your

deep cleaner assembles quickly and

easily. the only tool you will need for

assembly is a phillips head screwdriver.
1.
Locate the screw pack, which is taped

to the upper handle.

2. Slide the upper body onto the lower

body, taking care not to leave a gap

between the upper and lower body.

3. firmly holding the upper body, screw the

2 screws into the holes marked with arrows.

tip: If you are having difficulty tightening the

screws, remove, re-insert, and tighten again.

4. After tightening the screws, ensure proper fit

between the upper and lower body by trying

to separate the two. If assembled properly,

there should be no gap. If a gap appears

between the two (see picture at right), continue

to tighten the screws until no gap is present.

5. Slide upper handle into upper body by

aligning the pin and sliding into place.

note: be sure to secure upper

handle before lifting. Rotate handle

lock clockwise to secure.

6. Place solution tank on back of unit.
7. Wrap power cord.
assembly is now complete.

special features

Your BISSELL CleanView Compact

Performance is a home cleaning system

that uses a combination of hand hot tap

water, BISSELL cleaning formula, brush

agitation and suction to safely clean carpets.
dirtlifter™ powerbrush

The DirtLifter PowerBrush is designed to

enhance cleaning performance. The bristle

pattern safely lifts out the deep down dirt while

gently grooming carpet fibers. The floating

suspension self-adjusts to all carpet heights.

When the power is oN and the machine is in

the upright position, your carpet is protected

because the brush is lifted up off the carpet.

w w w. b i s s e l l . c o m

A

ssembly

5

O

perations

WaRning:

To reduce the risk of fire, use only

BISSELL deep cleaning formula for

full size machines in your deep

cleaner. Use of cleaning formulas

that contain lemon or pine oil may

damage this appliance and void

the warranty. Chemical spot clean-

ers or solvent-based soil removers

should not be used. These products

may react with the plastic materials

used in your deep cleaner causing

cracking or pitting.

2.

5.

6.

3.

pin

coRRect

incoRRect

4.

Advertising