Bissell 20N4 - Manual (Page 11)

16
w w w . b i s s e l l . c o m
11
O
peration
Carpet cleaning (continued)
2. Remove formula tank from back of machine.
2a. fill the formula tank by first unscrewing the
cap and insert. Always use genuine BISSELL
formulas to maximize cleaning and for the
safety of your machine. Fill water up to "WATER"
line and then fill up to "FoRmULA" line with
BISSELL 2X concentrated formula. Replace the
cap and insert. Place formula tank back into the
slot in the back of the machine for a snug fit.
3. Set custom clean dial. Simply choose one of
the 4 settings (heavy traffic, normal clean,
light clean, or water rinse) and the ProHeat
2X will adjust the right amount of cleaning
formula to mix with the heated water to fit
your cleaning need.
4. Set Readytools dial to the floor cleaning setting.
5. plug into a proper outlet and turn the power
and heater switches to the oN ( I ) position.
Allow 1 minute for the built-in heater to warm-
up before cleaning. The ProHeat 2X will be fully
warmed and will provide optimal performance
after one minute of continuous heated cleaning.
6. cleaning strokes. While pressing the spray
trigger, make one slow forward wet pass and
another one back. Let the built-in heater, formula,
and DirtLifter PowerBrushes do the work for you.
caution: Do not overwet. Take care not to run
over loose objects or edges of area rugs. Stalling
brush may result in premature belt failure.
Note: your machine is equipped with a
circuit breaker that will automatically shut
off the brush if a large or loose object is
caught in the brush roll. If that happens, be
sure to unplug your machine, remove the
foreign object, and then plug the machine
back in to reset the circuit breaker.
Release the spray trigger and make one
slow forward and backward pass over
the same area to remove any residual
dirty water and aid in drying. Repeat
cleaning passes until solution being pulled
up appears clean. Continue passes without
pressing the spray trigger until you can’t see
any more water being pulled up.
FLOOR
CLEANING
2. 2a.
4.
RIN
SE
W AT ER
3.
Power Switch Heater Switch Power Switch Power Switch
5.
Keep plenty of genuine bISSEll
advanced cleaning formulas on hand so
you can clean whenever it fits your
schedule. always use genuine bISSEll
deep cleaning formulas. Non-bISSEll
cleaning formulas may harm the
machine and void the warranty.
WaRNING:
to reduce the risk of fire and
electric shock due to internal
component damage, use only
bISSEll cleaning fluids intended
for use with the deep cleaner.