Bissell 53U6E - Manual (Page 11)

w w w. b i s s e l l . c o m
11
O
perations
Empty the 2-in-1 water tank/
clean removable nozzle cont
5. When finished, replace nozzle by slightly
raising front of machine to line up slots on
the base with the hooks on nozzle. Attach
at base first and then click nozzle into
place.
NOTE: If nozzle is not attached
properly loss of suction will occur.
6. To continue carpet cleaning, refer back
to pages 10 through 11, beginning with
“Fill the 2-in-1 water tank” on page 10.
If cleaning is complete, refer to the
“Maintenance and care” section on
page 15.
ReadyTools™
Your deep cleaner comes equipped with a
hose and at least one attachment for clean-
ing stairs, upholstery, and more.
Important! If using the machine to
clean upholstery, check upholstery
tags.
1. Check manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you can
use your deep cleaner. If the tag is coded
with “X” or “S” (with a diagonal strike
through), or says “Dry Clean Only,” do
not proceed. Do not use on velvet or silk. If
manufacturer’s tag is missing or not coded,
check with your furniture dealer.
2. Check for colourfastness in an inconspicu-
ous place.
3. If possible, check upholstery stuffing.
Coloured stuffing may bleed through fabric
when wet.
4. Plan activities to give upholstery time to
dry.
5. Vacuum thoroughly to pick up loose
debris and pet hair. Use a vacuum with
a brush attachment and a crevice tool to
clean in fabric folds and tufts.
6. To begin cleaning with attachments,
follow the instructions on page 10 for
filling the 2-in-1 water tank.
5.
Adsdfdd ghg bvh cvbbj jkn hnbj
jkvh
gcghhjj jhffhl k
llgh
Manufacturer’s tag