Bissell 79T3 - Manual (Page 12)

12
w w w . b i s s e l l . c o m
WARNING:
To reduce the risk of fire, electric
shock or injury, unplug from the
outlet before servicing.
T
roubleshooting
Reduced Spray OR No Spray
Possible cause Remedies
1. Clean water/formula tank may be empty 1. Turn power switch off; refill tank with
clean hand hot tap water and formula
2. Clean water/formula tank may not be seated properly 2. Turn power switch off; remove tank
and reseat
3. Pump may have lost prime 3. Turn power switch off; after 1 minute
turn on and depress spray trigger
Be sure there is cleaning formula in the
clean water/formula tank, it will make the
machine prime faster
4. Spray tip may be clogged 4. Remove spray tip and rinse thoroughly
under hot water. Replace with the o-ring tip
going down into the machine
No spray through the hose
Possible cause Remedies
1. Pump may not be primed 1. Turn ReadyTools dial to FLOOR CLEANING
and depress spray trigger for a few a
seconds until you see suction coming up
the nozzle
Turn ReadyTools dial back to TOOLS
PowerRoller Does Not Turn
Possible cause Remedies
1. The brush belt is off or broken 1. Refer to page 11, steps 1-5 for instructions
on how to access the belt
2. Look at the belt and check for breakage or
mis-alignment on the cogs. If there is no
evidence, replace all parts following steps 8-10.
3. In the event your belt is broken, a replacement
belt may be ordered at www.bissell.com or by
calling BISSELL consumer services. Refer
to the parts list on page 14. Complete installation
instructions will come with the replacement belt
Machine not picking up solution
Possible cause Remedies
1. Dirty water tank may not be seated properly 1. Turn power switch off; reseat tank
2. ReadyTools dial may be on TOOLS 2. Turn ReadyTools dial to FLOOR CLEANING
3. Float may have shut off 3. Turn power switch off and empty tank if
necessary. If tank is not full, wait
30 seconds and turn power switch on
4. Dirty water tank may be full 4. Turn power switch off and empty tank
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store
For UK inquiries:
monday - Thursday
9 am — 5 pm
friday 9 am — 4 pm
BISSELL homecare (Overseas) Inc.
The Boat Yard
105 Straight Road
old Windsor
Berkshire, SL4 2SE
United Kingdom
Telephone: 0870-225-0109
For New Zealand inquiries:
monday - friday 9 am — 5 pm
Parex Industries Ltd.
5 Tolich Place
henderson 0610
Auckland
New Zealand
Telephone: 0800-247-735