Bissell 42H5 - Manual (Page 8)

w w w . b i s s e l l . c o m
O
perations
8
Special tools
Your BISSELL Pet Hair Eraser
™
is
not only a powerful carpet and rug
vacuum cleaner, it’s also a versatile
bare floor and above floor vacuum
cleaner when you select one of the
special tools.
1. Floor Nozzle:
Use to vacuum carpets, rugs and bare
floors. Swivel head turns to get into
tight spaces and fits under cabinets.
A. To vacuum carpets and rugs, push the brush
switch to the carpet position. This will pull
the brushes up into the floor nozzle.
B. To vacuum bare floors, push the brush
switch to the bare floor position. This
will extend the brushes down from the
floor nozzle.
2. Upholstery tool: To vacuum rugs and
carpet surfaces, flip down the Pet Hair
Lifter until it clicks into place on the front
of the Pet Hair Eraser Floor Nozzle.
Then push the brush switch to the carpet
position to pull the brushes up into the
Pet Hair Eraser Floor Nozzle.
3. Crevice tool: Use the crevice tool in tight,
narrow spaces.
4. Dusting brush: Use the dusting brush to
dust furniture, blinds, books, lamps, shelves
and baseboards.
5. Wide Pet TurborBrush ™ Tool: Use
rotating brush action for small, flat areas
such as cushions and beds.
NOTE: Press down gently and pull
toward you in a raking motion. Too
mush pressure will cause the brush
to stop rotating.
6. Pet Contour Tool ™ Use to reach into
corners and edges on stairs, plus arm-
rests and other curved surfaces. The
tool can be flipped to use in any direction.
1A.
1B.
2.
3.
4.
5.
Brush Down
Brush Up
NOTICE:
This tool is designed
to remove pet hair from
upholstery or carpeted
surfaces. It should not
be used on pets.
6.