Bissell 1429 - Manual (Page 7)

7
clearing clogs from the dirt cup
1. Unplug the vacuum from electrical outlet.
2. Remove the dirt cup from the vacuum,
following steps 1-3 of emptying the dirt cup
on page 6.
3. Remove the dirt cup filter assembly from
the dirt cup, following step 2 of Clean the
dirt cup filter on page 6.
4. Tap the dirt cup filter assembly over a
garbage container to remove any dirt or
debris from the dirt cup filter screen that
surrounds the dirt cup filter.
5. Reach up into the dirt cup to clear any dirt
or debris from the dirt cup.
6. Check to see if there are any clogs
in the suction inlet.
7. After clearing any dirt or debris from
the dirt cup, replace the dirt cup filter
assembly back in the dirt cup following step
8 of Cleaning the dirt cup filter on page 6.
Replacement Parts
These items are available for purchase as accessories for your BISSELL vacuum:
To purchase visit www.BISSELL.com.
pArT # pArT nAme pArT # pArT nAme
160-1459 Dirt Cup Filter Screen 160-1460 Dirt Cup Filter
160-1461 Post-Motor Filter 160-3821 Floor Nozzle
203-1537 Hose with Handle 203-1579 Extension Wands (2)
203-1539 Combination Crevice Tool/
Dusting Brush 160-1465 TurboBrush™ Tool
160-1463 Turbine Floor Tool 160-1464 Hard Floor Tool