Bissell 61Z4 - Manual (Page 11)

w w w. b i s s e l l . c o m
11
M
aintenance and care
Replacing the hepa filter cartridge
the hepa filter cartridge should be
replaced if machine performance is
noticeably declining. More or less
frequent replacing may be required
based on individual vacuuming habits
and types of debris picked up.
note: to have the benefits of
the airetight
™
hepa system,
you must use the bissell hepa
filter cartridge.
1. Remove the dirt container.
2. To remove the HEPA filter cartridge, push
in on the front of the filter door to unlatch.
Lift up to access.
3. To check or remove, unscrew the center
screw.
4. If necessary, replace the used HEPA
filter cartridge with a new one.
note: to avoid damaging
the hepa filter cartridge
and reducing its filtration
capabilities, be careful not to
touch the filter material. the
hepa filter cartridge is not
washable.
5. To ensure a tight seal be sure to
tighten the filter cartridge screw until
snug.
do not oVeR tighten.
Make sure the filter door latches
completely.
2.
3.