Bissell 5283E - Manual (Page 9)

w w w. b i s s e l l . c o m
O
perations
9
2.
Pet Hair Fabric Tool
(select models):
Use this tool on fabrics such as
drapes, beds or anywhere else pet
hair may collect.
Long Reach Dusting Tool
(select models):
Use this tool for dusting large
surfaces.
TurboBrush® Tool
(select models):
Use rotating brush action for small
flat areas such as stair and cushions.
Press gently down and pull toward
you in raking motion; too much pres-
sure will cause brush to stop rotating.
Pet TurboEraser ™ Tool
(select models):
Use for removing dirt and pet hair
from stairs, upholstery, area rugs,
and other small areas. Pull the tool
towards you in a raking motion.
Note: The Pet TurboEraser™ Tool is
designed to remove pet hair from
upholstered or carpeted surfaces.
It should not be used on pets.
Emptying the dirt container
Empty the dirt container as soon as
the dirt reaches the “fill” line on the
front of the cup.
1. Unplug the vacuum from the electrical outlet.
2. Slide the Lock ‘n Seal lever to the left.
3. Grasp the handle and pull the dirt cup
straight out to remove from the vacuum.
4. Empty dirt into garbage container.
NOTE: Emptying the dirt container
after every use will help prevent
overfilling, and ensure that the
vacuum is ready to go the next
time you clean.