Bissell 36U3 - Manual (Page 4)

A
ssembly
4
P
roduct view
Dirt Container Release
Power Switch
Charging Indicator Light
Swivel Connector
Metal Extension
Handle Assembly
Non-Slip
Handle Grip
Charging Port
Handle Assembly
DC Adapter
the supreme sweep compact requires
very little assembly. Remove it from the
box and check it against the illustration to
familiarize yourself with the components
listed. the exploded view diagram with
part names will also be helpful if you
should need to order a part at a later time.
1. Assemble the handle by taking the section
with the non-slip grip (1) and the middle
section which has grey connector pieces on
each end (2). Insert the middle section (2)
into the grip section (1) and twist to tighten
into place. Next, take this assembled section
and insert into the bottom section with a hole
(3). Twist to tighten into place.
2. Take the assembled handle and line up the bot-
tom hole with the button on the swivel connec-
tor on top of the Supreme Sweep Compact.
Push the button on the swivel connector down
while pushing the assembled handle over the
button, locking the handle into place.
3. The Supreme Sweep Compact must be
fully charged before using. To charge the
unit, plug the charger into a standard
electrical outlet (230-240v-50hz); plug
the opposite end into the charging port
on the back side of your Supreme Sweep
Compact . The charging indicator light will
illuminate when properly connected and
will not turn off when fully charged. The
Supreme Sweep Compact is now charging.
note: the power switch must be in
the off position when
charging.
WaRning:
Electric/electronic appliances
should not be subjected to extreme
temperatures or high humidity.
Do not store the Supreme Sweep
Compact in bathing areas or close
to stoves, furnaces or radiators.
w w w . b i s s e l l . c o m
Charging Port
Handle Assembly
1
1 2 3
2
3