Bissell 9974e - Manual (Page 6)

M
aintenance and care
6
emptying dirt cup
the dirt cup should be emptied after
each use.
1. Make sure the EasySweep is in the
“oFF” position.
2. Hold the base of the unit over a waste
can to empty.
3. Press the dirt container release button and
empty the contents into the waste can.
note: the dirt container opens from
the bottom of the easysweep.
4. Push the dirt container door gently back
into place.
5. Clean exterior surfaces with a soft cloth
dampened with water only. Do not use
a strong detergent or other cleaner – this
may damage the finish. Always unplug
the EasySweep from the charger before
cleaning the surface
battery Removal and disposal
note: it is required that the battery
be removed from the easy sweep
before it is disposed of.
1. Important: Unplug charger.
2. remove handle, dirt cup and then pry
four wheels from bottom of sweeper.
3. remove (6) Phillips head screws on the
bottom cover as shown in picture.
4. Separate top and bottom cover.
5. remove wire connectors from the
battery pack.
6. Keep battery pack together – Do NoT
separate individual batteries. For specific
disposal instructions, please contact your
local authorities for requirements and
regulations on safe disposal or recycling
facilities in your area.
7. Discard remainder of product.
6 Screws
WaRning:
This product contains a
rechargeable nickel metal
hydride battery (sometimes
referred to as a “NiMH”
battery) pack. The average life of
a NiMH battery is 5 to 7 years,
depending on frequency of use.
Proper removal and disposal of
NiMH batteries is required.
WaRning:
To reduce the risk of electric
shock, turn power switch
OFF and disconnect charger
from electrical outlet before
performing maintenance or
troubleshooting.
w w w. b i s s e l l . c o m