Cobra Electronics microTALK 650 - Manual (Page 9)

CTCSS Privacy Code Scan
Your microTALK ® radio can automatically scan the CTCSS privacy codes (01 to 38) within
one (1) channel.
To Scan Privacy Codes:
1. While in LISTENING MODE, press the CHANNEL UP or CHANNEL DOWN button to choose the channel
on which you wish to scan the CTCSS privacy codes.
2. Press the MODE button until the Scan icon, CTCSS icon and the small numbers flash on the display.
3. Press the CHANNEL UP or CHANNEL DOWN button to begin scanning CTCSS privacy codes within the
channel you selected.
The Scan icon will continue to be displayed when CTCSS privacy code scan is On. Your radio will
continue to scan CTCSS privacy codes and stop as an incoming transmission is detected. Your radio will remain on that
channel/privacy code for 10 seconds.
While setting CTCSS privacy code scan, if you do not press any buttons for 15 seconds, your radio will automatically return to LISTENING MODE on
the channel/privacy code that was displayed before you entered Mode Functions.
During An Incoming Transmission, You Can Choose From The Following:
a. Press and hold the TALK button to communicate on that channel/privacy code. Your radio will remain on that channel/privacy code and
return to LISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN button to resume scanning CTCSS privacy codes.
If you press the TALK button while scanning and not within 10 seconds of receiving a transmission, you will transmit on the channel/privacy code
on which you last received a transmission. This will return the radio to LISTENING MODE.
If you do not press any button within 10 seconds, your radio will automatically resume scanning CTCSS privacy codes.
During Scanning (while not receiving a transmission), You Can Choose From The Following:
a. Press and hold the TALK button to communicate on either the channel or channel/privacy code that was displayed before you entered Mode
Functions or channel/privacy code on which, during scanning, you last received a transmission. This will return the radio to LISTENING
MODE.
b. Press the MODE button to proceed to next available Mode Function.
c. Press the LOCK button to return to LISTENING MODE on either the channel or channel/privacy code that was displayed before you entered
Mode Functions or the channel/privacy code on which, during scanning, you last received a transmission.
English MODE FUNCTIONS OPERATION
Select Scan Privacy
Codes Channel Buttons
Select Channel Mode Button