Drucker Diagnostics Model 642VFD Plus Centrifuge - Manual

1˝ Tube
Cushion
p/n 1525
Operator’s Manual
Model 642VFD-Plus • Laboratory Centrifuge
Rev. C
Programmable Run Time
is Factory Preset to
10 Minute 3,800 RPM
5 Minute 1,800 RPM
See Page 5
Available Accessories:
WARRANTY:
The Drucker Company warranties that this centrifuge is free from
defects in workmanship and parts for 12 months.
P/N 7711067
Protected by U.S. patent # 6,811,531
Replacement Parts:
Part No. Description
7724037 .................... Foot, rubber
7751068 ................... Switch, lid safety
7786021 ................... Rotor, 6-place, horizontal
7735014 ................... Motor, 1/30 HP, 115 VAC permanent split capacitor
7729006 ................... Capacitor, 4μF, 250 VAC
7717036 ................... Electronic timing and locking board 230 V
7751043 ................... Circuit Breaker
7760005 ................... Type F Power Cord
7714101 ................... Pawl, latch, lid
7714103 ................... Knob, latch, lid
7712316 ................... Lid
7724071 ................... Hinge, friction
7732018 ................... Seal, lid gasket
7713031 ................... 100 mm tube holder, red
7713033 ................... 75 mm tube holder, green
Tube
Holder Caps
p/n 7713011
0.25˝ Tube
Cushion
p/n 9150
6-Place
Horizontal Rotor
p/n 7786021
75 mm
Tube Holder
p/n 7713043
100 mm
Tube Holder
p/n 7713040
Providing Quality Centrifuges since 1932
Made in the USA by
200 Shadylane Drive, Philipsburg, PA 16866 U.S.A.
Phone: +1-814-692-7661 • Fax: +1-814-692-7662
www.druckercompany.com