Drucker Diagnostics Model 842HS Centrifuge - Manual (Page 3)

WARNING:
For the safety of both the operator and service personnel,
care should be taken when handling substances that are known to be toxic,
radioactive or contaminated with pathogenic microorganisms when using this
centrifuge. When Risk Group II materials are used (as identified in the World
Health Organization “Laboratory Bio-Safety Manual”), a Bio-Seal should
be employed. The rotor and rotor accessories should not be considered as
Bio-Seals. More than one level of protection must be provided in the case of
materials of a higher group. The use of flammable or explosive materials as well
as those materials which chemically react vigorously is prohibited.
Model Description
The Hematofuge 842HS is a continuous-duty, digitally-controlled centrifuge designed for the
separation of fluid samples. The 842HS offers control over almost every aspect of the unit’s
operation from variable acceleration and deceleration to easy time and speed input. High speed
and force capability greatly reduce processing times. The
exclusive Drucker Microhematocrit rotor allows for quick
and easy sample loading and horizontal separation. Save
settings in one of 10 memory locations and recall them
at the touch of a button.
Intended Use
General purpose laboratory centrifuge for sample
separation.
SUPPLIED ACCESSORIES (Standard)
One (1) Sixteen-Place Microhematocrit/ serum/ QBC rotor
p/n
7786050
Also included (not shown):
• One (1) Line Cord • One (1) Operator’s Manual
page 3
•The rotor and rotor accessories are rated for a rotational speed of 12,000 RPM (a force of 13,520 xg).
WARRANTY:
The Drucker Company warranties that this centrifuge is free from
defects in workmanship and parts for 2 years.
Made in the USA by
200 Shadylane Drive • Philipsburg, PA 16866
Phone: 814-342-6205 or 814-692-7661 • Fax: 814-692-7662 • www.druckercompany.com